Skip to content
Inventory sale through Dec 19: B-stock 25–50% off, in-stock A-stock 15% off online.New site. Inventory sale through Dec 19.What's newSee us at SfNSee us at SfN →
NeuroNexus

NeuroNexus · neuronexus.com · Glossary

Spike (Extracellular Action Potential)

Signal Processing
A spike is the extracellular voltage transient produced by one neuron's action potential: a deflection under two milliseconds long and tens to a few hundred microvolts in amplitude, recorded by an electrode site close to the cell.

The action potential drives the strongest transmembrane currents a neuron produces, and the spike is the potential that those currents generate in the extracellular space (Buzsáki et al. (2012)). Near the soma, the waveform is typically a fast negative trough followed by a smaller, slower positive phase. The extracellular spike is not simply the intracellular action potential inverted: only the trough follows the derivative of the intracellular waveform. Farther from the soma, the trough is smaller and a positive first phase may appear. Positive-dominant and triphasic spikes generally originate from axons and dendrites (Sun & Ibbotson (2026)).

Spike amplitude decreases steeply with distance, roughly with the square of the distance from the neuron. Beyond about 50 µm, spikes are typically too small for accurate sorting (Siegle & Steinmetz (2026)), and beyond about 150 µm they are generally not detected (Quian Quiroga & Panzeri (2009)). This range is the detection radius. Spikes are brief and rarely synchronous across neurons, so they contribute little to the field potential below about 100 Hz (Buzsáki et al., 2012).

The electrode site and the recording settings also affect the recorded waveform. A larger site averages a very local potential, and a smaller site has more thermal noise (Siegle & Steinmetz, 2026). In one study with a silicon probe, adjacent sites of 110 and 368 µm² recorded the same waveforms (Drake et al. (1988)). Filters can broaden a spike or add a phase to it (Sun & Ibbotson, 2026). Spikes are detected against a threshold and isolated with a band-pass filter, typically about 300 Hz to 6 kHz. Both are settings, and both affect which events are counted as spikes. Sampling is typically at 20 to 30 kHz. Assigning spikes to neurons is spike sorting, and a sorted neuron is a unit.

Typical values

Durationunder 2 ms
Amplitude at the sitetens to a few hundred µV
Fall-off with distanceabout 1/r² (dipole)
Bandisolated at about 300 Hz to 6 kHz (filter setting)
Sampling rate20 to 30 kHz

Cite this term

NeuroNexus. "Spike (Extracellular Action Potential)." NeuroNexus Glossary, updated 2026-11-10. https://www.neuronexus.com/resources/glossary/spike


Category:

Signal Processing

· Data acquisition, signal quality, and processing concepts

Ask

Cart

History

Resources

Describe your setup and we'll match you to the right probe

Products, compatibility, documents and how to choose. Quotes and orders go to our team.

Oaks 0.8α

Ctrl+K

Save products while browsing — they'll appear here

Look for the "Add to cart" button on product pages

Log in to see your conversation history and quotes

Sign in

Featured resources

Contextual documents and guides will appear here based on the current page.